Label 8 / 8+
Family: Scope Plugins
Type: Freeware
2 handy devices to label your source/dest and patch-bay i/o.
LABEL 8
Editable text displays for:
- Source/Dest: for your Adat, Z-Link…
- Channel number: in general from 1 to 8 (ADAT / Z Link source dest)
- Name: to name your source/dest (eg, guitar, synths, effect units)
- Bay: for your patch-bay i/o.
- All text displays support copy/cut/paste (ctrl+c / ctrl+x / ctrl + v).
Also includes:
- Color Selector pot
- Display for the preset name.
- Preset ready
The device also contains i/o which are simple “thru” connections: you can connect the device in between your source and destination. You can also leave it unconnected.
LABEL 8 +
Same as “Label 8” but with:
– Color codes for jacks.
– Source/Dest type switch for a more informative panel
– Color codes for jacks.
– Source/Dest type switch for a more informative panel
- Direct to Dest: an external equipment is connected directly to your ADDA and these outputs are not available on the patch bay.
- Direct Source: an external equipment is connected directly to your ADDA and these inputs are not available on the patch bay.
- No Connection: the patch bay back jacks are not connected to your ADDA and cannot be used.
- Free connection: the patch bay is fully connected and waits for you to plug something here.
